Fluid Components International’s twin alarm FLT93 Series flow change provides an early warning alert to the potential of dry operating conditions, cavitation and different pump points that can result in emergency shutdowns and dear upkeep.
The FLT93 Series circulate swap reliably monitors the flow and temperature of liquids, gases, and slurries. – Image: Fluid Components International
FCI’s FLT93 Series move switch reliably monitors the flow and temperature of liquids, gases, and slurries. It is designed for pump wet/dry detection, where sudden, unexpected reductions in media move charges can leave pumps vulnerable to over-heating conditions that shutdown process traces and require troubleshooting and fixing. The SIL2 rated instrument is meant for heavy-duty, potentially hazardous process industry environments and comes with a comprehensive list of world security approvals.
It has a no moving components design and provides a strong scheme for pump safety with its dual alarm functionality. With Alarm 1, the change detects a low circulate state of affairs anyplace between 0.01 and three ft per second FPS (0.003–0.9 m per second MPS). pressure gauge น้ำ is a pre-warning signal for the control system or operator who can then decide to maintain the pump running or to shut it down.
If an Alarm 2 happens because the feed line to the pump is running dry, this is able to be an emergency signal to close down the pump instantly as a result of the bearings now see gasoline as a substitute of a liquid as a heat switch media. In such conditions, the temperature of the bearings could rise very fast. Using a flow switch prevents permanent injury to the pump’s bearings.
Share